We’ve all had that moment: a squeaky door hinge, a stubborn zipper, or a rusty bicycle chain. And more often than not, our go-to solution is that blue and yellow can tucked away in the corner of our garage or under the kitchen sink – WD-40.
But, did you know that WD-40 has more uses stopping a squeak?
WD40 Uses
WD-40, is a multi-purpose spray, has been used for household squeaks for decades. Its name may sound like a droid from Star Wars, but it has more uses than you may have ever imagined!
From silencing squeaky hinges to protecting tools from rust, this spray can be found in most homes. Today, let’s look at the many (and sometimes surprising) WD-40 uses, you’ll see why everyone needs to have some on hand all the time!
You Might Also Like: 24 Uses For Essential Oils Recipe Guide
1. Remove carpet stains
To use, simply spray WD-40 onto the stain, let it sit for a few minutes, and then gently blot with a clean cloth.
It’s always important to test anything you do like this on a small, hidden patch of your carpet first to make sure you don’t cause any discoloration or damage. After the stain is lifted, clean the area with soapy water and let it dry.
2. Clean piano keys
Spray a small amount of WD-40 onto a soft cloth and gently wipe the keys, this will not only remove stubborn dirt and stains but also provide a protective layer that will repel dirt and moisture.
But, be sure you don’t get the cloth too wet and that you avoid any contact with the wooden parts of the piano.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
3. Remove glue from Jam Jar Labels
We’ve all been there: You’ve glass jar once filled with jam, jelly, or maybe even pickles, and you’re left with an empty jar that you JUST KNOW has so many DIY projects or storage solutions in its future. (I have many and forget to use them…)
However, the sticky residue from the label is something you’ll have to deal with first. This is where WD-40 comes in. Spray it on and start scrubbing – it will remove it easily and quickly!
4. Toilet Cleaner
Hard water stains, lime scale, and mineral deposits in toilets can be difficult to remove. Instead of reaching for chemical cleaners, give your trusty can of WD-40 a shot.
All you need to do is spray over the problem areas, wait a little bit for it to loosen and dissolve those deposits. Then scrub with a toilet brush and flush. You may be surprised at the sparkling clean results.
5. Get grease stains out of clothes
One of the most incredibly effective uses of WD-40 is its ability to remove stubborn grease stains from clothes. If you’ve ever dropped a slice of pizza on your favorite shirt or smeared engine oil on your jeans, you know how tricky these stains can be. Enter WD-40.
Simply spray a small amount directly onto the stain, let it sit for about 10 minutes, and then wash as you normally would.
Side Note: If you get hair dye on your clothes – hair spray works the same way.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
6. Remove Scuff marks from floors
Whether it’s from dark-soled shoes or heavy furniture being dragged across the floor, they are sometimes hard to remove. Again, enter WD-40. With just a quick spray and a gentle rub with a soft cloth you’ll see those marks disappear like magic!
Wipe away any excess product to make sure the floor doesn’t get too slippery.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
7. Remove ‘Paint Rub’ From Another Car
Before you panic or shell out money for professional repair, grab your can of WD-40.
Again, WD40 works wonders in lifting paint marks off your vehicle without damaging the original finish. Spray on the area, let it sit for a few minutes, then gently rub it off with a soft cloth.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
8. Countertop Stain Remover
Those stubborn stains on your kitchen counters or bathroom vanities that you can’t get out with any other cleaners should come out with WD40.
Just spray the stain, let it sit for a few minutes, and then wipe it away with a clean cloth.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
9. Restore chalkboards
For vintage chalkboards or daily-use ones that have seen better days, a light spray of WD-40 can work wonders. Spray a small amount onto the surface and gently rub it using a soft cloth.
Not only will it remove old and stubborn chalk marks, but it will also rejuvenate the board, giving it a cleaner, fresher look.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
10. Removes water spots from mirrors
Water spots are often left behind by mineral deposits in hard water, which can make mirrors look foggy and dirty.
But, WD-40 can fix that quick. Just spray a small amount of WD-40 onto the water spots, let it sit for a few minutes, and then wipe it with a clean cloth.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
11. Remove Gum from Hair
Just like it can remove gum from your carpet, WD-40 can also remove gum from your hair. The spray cuts the stickiness of the gum, making it easier to slide it right out.
To use, spray a small amount of WD-40 on the problem area, gently work it with your fingers, and guide the gum right out.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
12. Repel Snow & Ice From Car Windows
As the winter approaches along with frosty mornings, frozen windows and windshields are a thing.
Applying a light coat of WD-40 spray to your car windows the night before to help prevent the buildup of snow and ice.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
13. Cleans fiberglass bathtubs
Over time, fiberglass bathtubs can accumulate soap scum, water spots, and minor stains. Spraying W-D40 over these trouble areas and letting it sit for a few minutes before wiping can make a big difference.
But remember to rinse the bathtub thoroughly after cleaning to remove any residue and prevent a slippery surface.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
14. Keep Spiders Away
Use WD-40 in common spider hotspots, like:
- window sills
- corners of rooms
- secluded areas
It can actually act as a repellent. It make surfaces slippery, discouraging spiders from weaving their webs or settling in.
The smell also repels them. Even though the smell is not overly strong or offensive to most humans, it seems that spiders will avoid it.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
15. Unstick LEGOs
Before resorting to teeth or nails to pull apart stuck Lego pieces, consider this WD-40. Try spraying WD-40 between the stuck bricks to loosen them.
Just make sure you thoroughly wipe off any excess residue after so they’re safe to build with.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
16. Shines leaves of artificial houseplants
WD-40 sprayed on the leaves of your artificial plants helps to remove dust and also adds shine.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
17. Protect Bird Feeders
By spraying a light coating on the pole or whatever hanging support you’r using for the bird feeder, makes the surface too slippery for squirrels to climb.
It’s great for allowing IN the birds and keeping OUT the squirrels and other bird seed bandits.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
18. Remove Super Glue
If you’ve ever accidentally glued your fingers together – ugh – or found stubborn dried super glue spots on surfaces, there’s a solution.
A little spray of WD-40 can help to soften the bond. Gently applying and letting it sit for a minute can make the glue easier to remove without causing damage.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
19. Pest-Proof Your Trash
Pests like rats, raccoons, and ants are often attracted to trash cans, looking for leftover food scraps.
Spraying a light coat of WD-40 on the outside and rim of your trash cans not only makes the surface slippery (deterring rodents and raccoons from climbing) but can also mask the scent of food waste.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
20. Break in a New Baseball Glove
WD-40 can also soften the leather of a new baseball glove, making it more pliable and game-ready.
A light spray, followed by working the glove out, can speed up the breaking-in process, making sure you’re ready for the game.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
21. Remove Tight Jewelry
WD-40 helps reduce friction when removing your stuck jewelry, like a ring. This makes the jewelry slide off much easier.
All you need to do is spray the WD-40 around the ring or the bracelet and pull. Just be sure to thoroughly wash both your jewelry and your skin after using WD-40 so that no residue remains.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
22. Clean Oil Spots
WD-40 is perfect for removing oil spots from driveways, garage floors, and other surfaces. It can effortlessly break down oil, allowing you to easily wipe or wash away.
So, the next time you see that oil spot, remember that a can of WD-40 could be your quick answer.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
23. Clean candle soot
WD-40 can be used as an effective candle soot cleaner.
By lightly spraying the area and gently wiping it away with a soft cloth, you can say goodbye to unsightly soot marks.
It’s always important to test anything you do like this on a small, hidden area first to make sure you don’t cause any discoloration or damage.
You Might Also Like: 12 Everyday Uses For Dawn Dishwashing Liquid
WD-40 has proven itself time and time again to be more than just for squeaks. From household fixes to household hacks, it has so many uses it’s surprising.
Whether you’re dealing with a stubborn stain, rusty tools, or just looking for a quick fix, chances are WD-40 could be the solution.
Stock up now and bookmark this page so you’re always ready!
Leave a Reply